HT MACROTEST G3 Multifunction Tester Testing electrical installation

Install APP http://www.ht-instruments.com/app.html

Download Brochure http://www.ht-instruments.com/en/catalogue

MACROTEST G3 is an innovative instrument capable of carrying out safety tests on civil and industrial electric systems in compliance with IEC/EN61557-1. Its capacitive TFT color touch-screen display, its icon menu, its help-on-line and its user-friendly development make the instrument extremely intuitive even for unskilled users. Its numberless features grant the user a wide range of applications in the world of measurements.
MACROTEST G3 allows saving all measures into an internal memory so transferring the saved data to a PC, a PDA or a smartphone by means of USB (provided as standard) or Wi-Fi (C2013 optional accessory) interfaces. The software supplied among standard accessories allows printing testing reports.
MACROTESTG3 also drives the optional accessory IMP57 to carry out high resolution (0.1m) loop/line impedance measurements with prospective short-circuit current calculation. This allows accurate measurements even close to power stations enabling the user to correctly size the protection devices in any system.
Further possible tests consist in checking breakdown current, tripping current, I2t relative to breakers (MCB) with curves B, C, D, K and fuses type gG as well as aM. Through optional clamp model HT96U it is possible to measure the leakage current. Optional clamp T2100 permits to quickly check the resistance of earth probes without disconnection from earth system.
Function
Continuity of protection conductors with 200mA
Insulation resistance with 50, 100, 250, 500,1000V DC
Type A, AC, and B general, selective, and delayed RCDs up to 1000mA
Line/fault impedance with prospective short circuit current calculation
High resolution line/fault impedance (with IMP57 optional accessory)
Curve B, C, D, and K MCBs and type gG and aM fuses
Selection of length, type, and insulation of the cable under test
Selection of tripping time of the protection device under test
Earth resistance and soil resistivity with auxiliary rods
Earth ground resistance (with T2100 optional accessory)
Non-trip earth loop impedance
Phase sequence indication
Leakage current by means of the external transducer HT96U (optional)
Environmental parameters (C/F, HR%, Lux) by means of optional probes
TFT display with touch-screen
Help on-line
Internal memory
USB interface to connect to the PC
Wi-Fi (optional) interface to connect to PDAs, smart phones, etc.
Rechargeable NiMH batteries (external battery charger)

Leave a Reply

Your email address will not be published. Required fields are marked *